Skip to content
LiverpoolTech Group.

LTG tools

Fibre Link Budget Calculator

Estimate cable-plant loss and compare it with the minimum-power budget of your selected optics. Keep the design margin visible and replace the example figures with the specifications for your link.

fibre

Calculate your plan

Enter the figures for your project. Calculations run in your browser; the values are not submitted to LTG.

Build the plant-loss estimate

Include the fibre distance and attenuation at the relevant wavelength, mated connections, splices and any other specified optical losses. A connection means a mated pair; do not count the same interface twice. The initial figures are illustrative assumptions.

Compare compatible specifications

Use the selected optic’s minimum transmit power and receiver sensitivity under the relevant conditions. Their difference gives the minimum-power budget. Add your design margin to the estimated plant loss before comparing the requirement.

Verify more than minimum received power

Receiver overload, fibre type, wavelength, optical interfaces and the supported application remain separate checks. A positive budget result is not proof that the optics are compatible. Commission the installed link using the agreed test method and retain the measured results and identifiers.

Calculation method

Plant loss = km × dB/km + mated connections × loss/connection + splices × loss/splice + other losses. Required budget = plant loss + design margin.

Reference

FOA: calculating optical loss budgets

Discuss a commercial fibre link

Bring the assumptions and equipment details into a project conversation. We can review the installation requirements alongside the estimate.

Discuss a commercial fibre link ↗

Cookie and privacy settings

Your choice applies to the main website, Web Services and Security subdomains. You can change it at any time.